Check Out These Tips On How To Make A Flagpole Christmas Tree (2023)

Are you tired of seeing the evergreen conifer Christmas tree, and thinking of transforming your outdoor space into a magical Christmas wonderland? Perhaps you want to set up a uniqueChristmas tree decor—beautiful yet far from the norm.

If this fits the profile of what you want, then the Flagpole Christmas tree is worth considering. And what’s more, you don’t have to break the bank to create one.

With your PVC pipe, mini Christmas light strands, scrap iron, and electrical tape, you can create the most attractive flagpole Christmas tree in your neighborhood. And remember, this tree can be as high as 20 feet or more.

Now, let’s discuss how you can create your flagpole Christmas tree out of nothing.

How To Make A Flagpole Christmas Tree

Follow the first five steps below to create a frame.

Step #1:

Make a 3-inch-diameter loop out of a metal coat hanger. Each of your light strings will pass through this loop. Wound the loop to the top of the pole to make it stand erect.

Step #2:

Drill a deep hole into the ground, the spot where you want to install the Christmas tree pole. This hole should be about one foot wide and 18 inches deep.

Step #3:

Fix a wood, metal, or a galvanized pole inside the drilled hole. Pour mixed cement into the hole and around it to ensure the bar is firmly erect. Allow the cement to dry completely before proceeding with the setup.

Step #4:

Place the flexible PVC pipe close to the pole on the ground. Curve the pipe into a loop around the pole and use the PVC pipe connector to connect it to itself.

Step #5:

You can fasten your PVC pipe ring to the ground by hammering U-shaped metal anchors over the PVC pipe ring, securing it to the floor.

Now, it’s time to fix your dazzling string lights. The length of each string you have will determine the number of light strings you’ll use. Sometimes, the string length also depends on the type of brand you bought. Next, you can follow steps 6 to 10 to fix your mini-lights.

(Video) The best way to build a flagpole Christmas tree (The 8 strand tree 4-66ft LEDs)

Step #6:

Apply a cable tie to the plug tip of the first string of mini-lights and secure it to the PVC pipe ring.

Step #7:

Now, use a ladder to insert the opposite end of the light string. Fix this tip through the loop at the top of your pole. Then use a cable tie to fasten this end of the light string to the PVC pipe on the other side of the pole.

Step #8:

Tie the connection with electrical tape and attach the second string of lights into the first. Extend the string lights for almost six inches along the base of the PVC pipe. Then, fasten the light with another cable tie.

Step #9:

Repeat the procedure of threading your mini-lights through the topmost loop. Keep attaching them to the opposite side. Cover the end of your third string of mini-lights with electrical tape, and don’t plug any extra strings into it. You can start attaching other lights from the base.

Step #10:

Wrap the connections with electrical tape after plugging the lights into extension cords. Plug the extension cords into your socket to switch the lights on.

How To Determine The Perfect Flagpole Christmas Tree Height

You’ll need to measure the area to determine what Christmas tree height is best for your home. This measurement involves gettingthe height of the flagpole and the amount of space available on the floor.

Below are the steps to take for accurate measurement.

Step #1:

Gather your measuring tools.

Tools such as measuring tape, a step ladder, a pen, and a sheet of paper are needed.

Step #2:

Measure the height of your flagpole.

It would be best if you used the step ladder to get the flagpole measurement then, minus 6 inches to get the maximum Christmas tree height.

(Video) The best way to build a flagpole Christmas tree (24 strand 20ft mega awesome tree)

Step #3:

Determine the overall width and length of the flagpole’s exhibition area.

Measure the width of the space surrounding the flagpole, where you want to erect the tree. Then, subtract approximately a foot from this figure. Likewise, measure the length of this area and subtract a foot from this value.

Step #4:

Determine the total square footage of the available space.

You can calculate the total square footage available for your tree by multiplying the width by the length of the floor space. The value you get will be your tree’s maximum diameter.

Finally, it would be best to consider the height of your tree toppers when calculating the height of your flagpole Christmas tree.

Types Of Toppers For Flagpole Christmas Tree

A lovely tree topper will complete your flagpole Christmas tree decor. You can select from so many options that match your favorite theme or style.

Tree toppers come in various shapes, but the most popular are stars, figurines, and bouquets.

Christmas tree toppers are available in other shapes like finials, starbursts, and snowflakes. You can also use your homemade ribbons or bows as light decor on your flagpole tree.

Star tree toppers are available in various styles, ranging from simple five-point designs to sophisticated three-dimensional Moravian types.

If you want additional sparkle, go for a design with bling, pearls, or sequined tree topper to match your Christmas tree lights.

Figurines toppers:

These toppers are also known as angel tree toppers. The angel tree topper is an all-time choice for the traditional Christmas outlook.

(Video) How to wire your flagpole Christmas trees (chicks dig em)

To give your flagpole Christmas tree a fanciful look, you can use seasonal figurines like Santa Claus, Rudolph the Red-Nosed Reindeer, or Frosty the Snowman.

Bouquet Tree toppers:

These toppers come with a variety of flower petals, twigs, and berries. These one-of-a-kind Christmas tree toppers are perfect for both classic and new decorations.

Tips to Make The Right Topper Choice For You Flagpole Christmas Tree

You can consider the detailed tips below to choose the best Christmas tree topper for your flagpole.

The shape of the tree:

Check that your Christmas tree topper matches the style and symmetry of your tree when making your selection.

A full-shaped Christmas tree looks fantastic with a star or angel tree topper, while a narrow or slim tree looks excellent with an elongated tree topper.

The weight of the topper:

Lightweight Christmas tree toppers made of paper, fabric, plastic, or fiber composite are perfect for most trees.

You can use fastening tools such as zip ties to secure your tree topper. If not adequately supported, heavier toppers, such as ones made of glass, can drop.

Your choice theme for decor:

The Christmas tree topper is the highlight of your flagpole tree and it should fit your entire decorating theme. You can use a star or angel tree topper in red, green, or gold for a timeless look.

If you’ve got a casual taste, you can use bouquets or bow toppers for a calm yet stunning outlook.

Safety Rules To Making A Flagpole Christmas Tree

You should be concerned about potential safety hazards before you set up your flagpole Christmas tree,you can take precaution to avoid mishaps.

Rule 1:

Prioritize your safety.

(Video) CHRISTMAS TREE FLAG POLE | How to Turn your Flag Pole into a Christmas Tree

You should pin down the electricity lines with a stake. Then, use electric tape to tie the electrical connections together. Remember to place the lighting lines out of the way of regular traffic.

Rule 2:

Use a solid stepladder to get to the top of the flagpole Christmas tree.

Rule 3:

Seek the assistance of a friend or family member to keep the tree’s body steady while you fasten the tree topper into place.

Rule 4:

Consider the weight of the toppers before fastening them to the tree, including the tools you need to fix them.

Rule 5:

Keep delicate items out of reach of children. Decors such as glass or crystal toppers can cause injury when they fall and shatter.

Rule 6:

Make sure the cables and plugs on pre-lit tree toppers are working perfectly. Finally, always inspect the connections for loose wires and broken bulbs before plugging them into a socket.

When Should You Put Up Your Flagpole Christmas Tree?

The day after Thanksgiving is the best day to put up your flagpole Christmas tree. For Americans, this date may fall on the Friday after Thanksgiving, at the end of November.

For many individuals, December 1 is the date when it is socially acceptable to put up your Christmas tree; any date before that is considered too early.

When Should You Take Down Your Flagpole Christmas Tree?

Some individuals will take down the toppers and put them back in the box on Boxing Day, while others may wait until January 1 to do so.

In all, the most common tradition surrounding the removal of the Christmas tree is to wait 12 days after Christmas, which falls on January 5.

Conclusion

It’s time to start planning your holiday decor for this year’s festivities, which includes, of course, your flagpole Christmas tree. Creating a flagpole Christmas tree is an opportunity to infuse your unique style into every detail.

(Video) How I build my flagpole Christmas tree (24 strand tree) My favorite Christmas tree

In addition, using dazzling toppers will give you one of the most stunning outlooks ever. This yuletide is a perfect time to dazzle your neighbors with your flagpole lights.

With your beautiful flagpole Christmas tree, you’re sure to have a stunning Christmas and definitely, a holiday to remember.

Similar Posts:

  • How Far Does PVC Go Into Fitting? Tips For DIYers
  • Comprehensive Tips On How To Tile Shower Niche Without Bullnose
  • How To Fix A Touch Lamp That Won’t Turn Off | Easy Methods
  • How Big Is A Traffic Light? Let’s Find Out The Traffic Light Dimensions!
  • This Is How To Find Sewer Line Under Concrete Slab
  • How to Choose the Right LED Lighting for Your Home?
  • 6 Tips On How To Protect Your Eyes
  • Why Do Football Players Wear Tape On Their Arms?
  • How To Change Liquid Cooling PC: Check Out These Simple Steps
  • How To Take Off Ceiling Light Cover? Learn To Remove Three Different Light Covers

FAQs

How do you make a simple Christmas tree? ›

  1. Step 1: The tree trunk. Cut a tree trunk out of the white cardboard. ...
  2. Step 2: Tree branches. Once the tree trunk is completed and dry. ...
  3. Step 3: Artificial snow. Once the tree trunk and branches are complete, add artificial snow. ...
  4. Step 4: Christmas ornaments. To decorate the tree, you will need ornaments. ...
  5. Step 5: Garlands.

How do you make a Christmas tree out of a flagpole? ›

Simply pull the zip. Tie. So it's now connected to the um rope and the flagpole i simply will raise

How do you make a Pole Christmas tree? ›

Making sure you don't hit any electrical wires. For about a foot and a half. And then you're going

What is the correct order to decorate a Christmas tree? ›

How to decorate a Christmas tree
  1. Place the Christmas tree and fluff the branches.
  2. Put the lights on.
  3. Add your tree topper.
  4. Start adding decorations.
  5. Hang your key baubles.
  6. Add picks and sprays.
  7. Showcase those extra-special ornaments.
  8. Time for finishing touching touches.
15 Sept 2022

How do you put Christmas lights on a tree step by step? ›

How To Put Lights On A Christmas Tree Video - YouTube

How do you make a big tree out of paper? ›

How to Craft a Large Paper Apple Tree - YouTube

How do you make a 3d star for Christmas? ›

How to Make 3D Paper Star - YouTube

How do you make a light tree in your yard? ›

How to Make Christmas Lawn Decoration - Simple Light Tree

How do you make a Christmas tree stand outside? ›

An Umbrella Stand Base

Another great way to keep your outside Christmas tree from blowing over in the wind is to purchase a heavy duty weighted umbrella stand base. These stand bases can be filled with rocks or sand, and simply slip the trunk of your tree in to the spot where the umbrella stand would go.

How do you make big Christmas lights? ›

How To - Ken Wingard's DIY Giant Holiday Bells - Hallmark Channel

How do you make outdoor Christmas balls? ›

How To Make A Giant Christmas Ball | DIY Christmas Decor - YouTube

What goes on a Christmas tree first? ›

Step 1: Hang Your Christmas Tree Lights

The first step in how to decorate a Christmas tree is adding the lights. Tree lights typically come on green or white wire strands, though you can also find black variations now, which are perfect if you happen to have a black Christmas tree.

How do you put a Christmas tree together? ›

How to Set Up an Artificial Christmas Tree - YouTube

How do you decorate a Christmas tree with ribbon? ›

How to Put Ribbon on a Christmas Tree - YouTube

How do you make a Christmas tree with string lights? ›

DIY String Light Christmas Tree - HGTV Handmade - YouTube

How do you wrap a tree with lights? ›

How To Wrap Trees With Lights - YouTube

How do I attach Christmas lights to my house? ›

How To Hang Exterior Christmas Lights - YouTube

How do you make a big Christmas tree? ›

She Made This Christmas Tree From Cardboard - YouTube

How do you make a Christmas tree star out of paper? ›

  1. Start Preliminary Folds. Start with a square of white card stock. ...
  2. Mark and Cut Center Lines. Open the folded paper and mark halfway from the center of the paper, along the 4 center lines. ...
  3. Create Star Shape. Fold each cut flap toward the diagonal fold lines. ...
  4. Glue Star Shape. Apply glue to every other flap. ...
  5. Finish the Star.

How do you make a large tree? ›

Minecraft: How To Grow Big Trees (100%) Tutorial - YouTube

How do you make a paper mache tree with chicken wire? ›

How to Make a Paper Mache Jungle Tree! - YouTube

How do you make a fake tree trunk? ›

DIY Fake Tree Stump With Spray Foam - YouTube

How do you make a 3D star in Illustrator? ›

Open illustrator and draw a star tool with gradient fill in it. Then go to effects>3D>Extrude/Bevel. Select preview to view the star in 3D while changing its settings. One can rotate the star in any angle as well as change the thickness of the star.

When decorating a Christmas tree what goes on first? ›

Start with the lights first

So for a 6ft tree, you'd need 300 bulbs or 15 metres of lights. The first, most important thing you need to do when decorating your Christmas tree, is to always add the lights first – it's more difficult to do this after you've added decorations like baubles and garlands.

Do you put lights or ribbon on the tree first? ›

Begin your tree decorating by adding lights and then the ribbon. Ornaments should always go on last. If you attempt to add ribbon after hanging ornaments, you run the risk of breaking ornaments as you style your tree. Now it's time to grab your scissors and start ribboning.

How do you decorate a tree like a pro? ›

How to Decorate a Christmas Tree Like a Professional - YouTube

Do you put garland on first or ornaments? ›

Garland: If you want to use garland, make sure to add it before you hang any ornaments. Start at the top of the tree and work your way down.

What do you put on top of a Christmas tree? ›

You can go for traditional Christmas tree toppers — think stars, angels and finials — or take things up a notch with a a Star Trek- or Disney-themed design.

How do you decorate a Christmas tree with mesh? ›

Decorating a Tree: Mesh and Ribbon - YouTube

How do you decorate a Christmas tree with colored lights? ›

How to Use Multicolored Lights on Your Christmas Tree! - YouTube

What color should I decorate my Christmas tree? ›

Red, green, and white are all excellent options. But gold will bring out some of the earthier tones in your Christmas tree, leaving you with something that feels festive, cozy, and versatile enough to pair with any décor scheme.

How do you hang Christmas lights around windows? ›

Use at least 6-8 hooks per window, 1 in each corner and 1-2 on each side of the window so the lights can hang properly. Hang the lights on the hooks, spacing them evenly apart. Begin at the highest point on the window and work your way down. Slide the bulbs into the notch on the hooks.

How do you fill a gap in a Christmas tree? ›

Fill gaps between your tree's branches with floral fillers, such as silk flower sprays, leaf bunches, or a DIY nosegay, as shown here. We used a base of artificial leaves, silver berries, and green ornaments, then wired and tied it with sheer ribbon. Plan to make at least 24 of these fillers for an 8-foot tree.

How do you put a tree topper on an artificial tree? ›

Christmas Tree Decorating Tips - How to place a tree topper - YouTube

How do you decorate a Christmas tree with ribbon? ›

How to Put Ribbon on a Christmas Tree - YouTube

How do you wrap a Christmas tree with ribbon? ›

HOW TO PUT RIBBON ON A CHRISTMAS TREE | 3 WAYS

How do you hang garland on stairs? ›

Secure one end of the garland to the end of the banister with a zip tie. Place one end of the garland at the top of your staircase. Wrap a zip tie around the end of the garland and the banister and pull it tight. Many stores sell special Velcro for hanging garland.

How do you attach wooden bead garland to a tree? ›

Decorating a Tree with Beaded Garland - YouTube

How do you hang a heavy ornament on a fake tree? ›

How To Hang Heavy Christmas Ornaments So They Won't Fall + ...

Videos

1. Flagpole Christmas tree Star bracket (how I use mine)
(Jattyco)
2. Flagpole install for a flagpole Christmas tree (removable HOA friendly)
(Jattyco)
3. Flagpole Christmas Tree Project
(Richard Weston)
4. Flagpole Christmas Tree Conversion Kit
(The Flagpole Company)
5. Flagpole Christmas tree star and light adapter installation
(Jattyco)
6. Building a flagpole Christmas tree Quick version!!!! (4-66ft LEDs equals 8 strand tree 😍)!
(Jattyco)
Top Articles
Latest Posts
Article information

Author: Chrissy Homenick

Last Updated: 01/24/2023

Views: 5785

Rating: 4.3 / 5 (54 voted)

Reviews: 85% of readers found this page helpful

Author information

Name: Chrissy Homenick

Birthday: 2001-10-22

Address: 611 Kuhn Oval, Feltonbury, NY 02783-3818

Phone: +96619177651654

Job: Mining Representative

Hobby: amateur radio, Sculling, Knife making, Gardening, Watching movies, Gunsmithing, Video gaming

Introduction: My name is Chrissy Homenick, I am a tender, funny, determined, tender, glorious, fancy, enthusiastic person who loves writing and wants to share my knowledge and understanding with you.