Instax Mini 11 Flashing Orange Light - Instant Camera Reviews (2023)

By Emma Johnson•Updated: 04/08/22•9 min read

As an Amazon Associate I earn from qualifying purchases.

One of the reasons for the rising popularity of the Instax Mini 11 camera is how user-friendly it is. There isn’t much that can go wrong when using this Fujifilm instant camera with only two control buttons.

However, one common issue with the Mini 11 from time to time is the orange flashing light that renders it useless.

Instax Mini 11 Flashing Orange Light - Instant Camera Reviews (1)

What could be the possible reasons for your Instax Mini 11 flashing orange light? Read on as we discuss common causes for this problem and how you can fix them.

Contents show

Top 3 Reasons Why Your Instax Mini 11 Instax Camera Is Flashing Orange Light – And Their Solutions

Using the Instax Mini 1 1 is not challenging to master.

While it does take time to get the hang of what subjects, lighting, and shooting distances work best for photos, it comes with slow synchro for low light, exposure control, automatic light adjustment, and shutter speed.

These automated features only require you to press and shoot while the camera does all the work!

READ NEXT: How to use Instax Mini 11

The flash charging lamp next to the lens needs to light up for the camera to work. When we say light up, the lamp is switched on, with no blinking. Since the Instax Mini 11 (like its predecessor Mini 9) has a constant firing flash, it needs to charge fully for the camera to be photo-ready.

Therefore, when the flash charging lamp starts blinking, the camera won’t operate. Thankfully, there are only a few things to check (or fix) to get the light to stop flashing.

(Video) Fujifilm Instax Mini 11 - FIX for BLINKING FLASHING ORANGE LIGHT Error

Here are the top three reasons why there’s a constantly blinking light on your Instax Mini 11.

1. Your Flash Is Charging

The number one reason the orange flash charging lamp blinks is when the flash is charging. The flash needs to fully charge to click a photo with the Instax Mini 11. Charging takes anywhere from 3 to 10 seconds.

Instax Mini 11 Flashing Orange Light - Instant Camera Reviews (2)

When you first use the Mini 11, you may think it’s a problem, but it is standard for the flash charging lamp to blink slowly. This indicates the camera is ready to use; it should light up within 10 seconds. Once it does, you have to wait for the flash to charge again before clicking.

2. Failed Battery Check

When the flash charging lamp starts blinking fast, the most common error is that the camera batteries are weak or dead. The Instax Mini 11 uses 2 AA-size alkaline batteries.

When the light blinks quickly, and your camera doesn’t work, your first action should be to check if the batteries need to be changed.

New batteries are good for approximately 100 images, amounting to ten Instax film packs with ten exposures. Keep in mind how many film packs you have gone through.

The Instax Mini 11, like others in the series, includes a film counter window on the back cover. The film counter lets you know the number of shots left in the film pack.

While the film counter lets you know how many shots you have taken per film pack, you need to watch how many packages you have gone through. Doing so can give you a good idea of when the camera batteries need replacement.

To change the batteries, open the battery compartment; you can find it where you grip the camera to take pictures. The compartment has a simple click-in lock, which will slide off with the help of your thumb.

Switch off the Mini 11 camera by pushing the lens barrel into the camera body and opening the battery compartment. Replace with new batteries. Use alkaline batteries as instructed by Fujifilm.

If the light still blinks, change the batteries while the camera is still on.

Switch on the camera by pressing the power button next to the lens barrel—the power button doubles as the lens release button. Once the lens is out, the Fujifilm Instax Mini 11 is on.

Now, take the batteries out and replace them with new ones. Click the shutter button to test the camera, and it should work fine.

3. Jammed Instax Film

Another standard error is a jammed instant film. If your batteries are new and the camera still won’t work, you may have the film cartridge stuck in the film compartment.

Instax Mini 11 Flashing Orange Light - Instant Camera Reviews (3)

Ensure that you do not try to pull out the instant film forcibly from the film ejection slot.

Instead, remove and reinsert the batteries while the lens barrel is released (in other words, the camera is on) to try and get the jammed film out. Once the jammed film is out, press the shutter button to take pictures. Replace the film pack if necessary.


Remember that the Instax mini film is light sensitive, and forcing it from the film ejection slot or opening the back cover while the film has shots can render it useless.

If the film cartridge (after the film cover is ejected) is exposed to heat or direct sunlight, you will have to insert a new film pack.

However, if the camera still doesn’t work and the light continuously flashes, you have an unknown error. This will, unfortunately, require you to send the camera back to the manufacturer.

How To Reset A Malfunctioning Fujifilm Instax Mini 11?

There is not much to cause the Mini 11 to stop working with a two-button function.

On the flip side, if the camera does malfunction (which occasionally happens since a microcomputer controls it), there isn’t a lot you can do to fix it except reset the device.

Fortunately, resetting the Mini 11 tends to get it back to working condition in almost all cases – unless the camera has been damaged – and it is pretty simple to do so.

To reset your Mini 11, ensure it is on by clicking the power button next to the lens barrel. Once the lens barrel is extended, take out the batteries and reinsert them in the battery compartment.

Fujifilm Instax Mini 11 – 5 Common Mistakes To Avoid

While a flashing light is an indication that the Mini 11 needs new batteries or the film is jammed in the ejection slot, there are several other mistakes you can make while using it.

Now, most of these mistakes will not cause the camera to stop working, but they affect the picture quality or eject blank images.

1. Wrong Battery Orientation

The Mini 11 power supply is two AA batteries, which can light up the flash charging lamp. This means the camera is ready to use. When placing batteries inside the battery compartment, ensure they go in as indicated.

(Video) Fujifilm Instax Mini 11 - 11 Mistakes and How to Avoid Them

2. Touching The Lens

When taking a picture, make sure you are not touching the lens, which can cause the flash charging lamp to go off. If this happens, the shutter button won’t click, and you will not be able to take a picture. Even touching the lens barrel lightly as you try to take a photo will cause the developed image to have dark borders.

3. Covering The AE and Flash Sensors

You can find the AE (Auto Exposure) and flash sensors below the flash charging lamp. Since the Mini 11 determines the correct shutter speed and flash based on the surrounding light, covering these sensors will result in overexposed Instax Mini 11 photos.

4. Leaving the Selfie Function On

One improvement made by Fujifilm in the Mini 11 is the access to Selfie Mode by extending the lens barrel till you can see the “SELFIE ON” mark. This was far simpler than the Instax Mini 9, where you had to keep a lens attachment handy.

However, the selfie mode is only suitable for selfies and close-range shots. You have to turn the selfie function off by pushing the lens barrel back into the camera body to take standard landscape images. Click the power button, and when the lens pops out, you will turn off the selfie mode.

5. Opening Up The Film Door With Unused Film

We have talked about how sensitive film cartridges are and how easily they can spoil if exposed to heat and sunlight. A common mistake that causes your final photos to turn white is opening the back door while the film still has shots.

When taking photos, check through the film confirmation window for the film inside the camera (if yes, it will be yellow). Also, check the film counter, which reveals the number of shots left in the film.


Why is my Instax blinking orange?

Instax cameras blink orange light when an error occurs. The most common error is the batteries being dead or too weak for the flash to charge. Another reason could be that the film is jammed in the ejection slot.

To stop the light from flashing, change the batteries. For the jammed film, take the batteries out with the camera turned on and reinsert them; reset the Instax camera and eject the film.

Why is the orange light flashing on my Instax Mini 11?

The orange light on the Instax mini flashes when the flash is charging. Once the flash is charged and the camera is ready to take a picture, the light becomes steady. However, should the light keep flashing quickly, an error has occurred.

Two main errors cause the Mini 11 to flash an orange light quickly: the batteries need to be changed, or the film has jammed. To stop the light from flashing, change the batteries. If that doesn’t work, reset the device by taking out the batteries and reinserting them while the instant camera is on, i.e., the lens is released.

The Bottom Line

The Fujifilm Instax Mini 11 uses two buttons to operate, thanks to auto exposure. With limited control, only a few things cause the camera to flash an orange light – either the batteries need to be changed, or the film is jammed. Both of these errors are easily correctable.

You can change the batteries or reset the camera by taking working batteries out and placing them back in the camera while it is turned on. Unfortunately, the camera will have to be returned to Fujifilm for any other unknown error.

(Video) Quick and Easy solution for Instax Mini blinking lights✨

Instax Mini 11 Flashing Orange Light - Instant Camera Reviews (5)

Emma Johnson

I have loved photography from a young age and more recently started experimenting with Instant Cameras from Polaroid and Instax. I also love dancing and hanging out with my friends :)

Instax Mini 11 Flashing Orange Light - Instant Camera Reviews (6)

Get Our FREE Instant Photography Cheat Sheet

This free cheat sheet will improve your instant camera photography skills by providing quick information on using instant cameras, lighting, taking selfies, and more!

No spam. Unsubscribe any time.

Keep Reading

Explore more →

Instax Mini 9 Tips And Tricks (for 2022)Are you looking for Instax Mini 9 tips and tricks? Today I will share with you tips on how to get the best out of your Instax Mini 9 camera and answer some of the most FAQs.
(Video) Ultimate Guide to the Fujifilm Instax Mini 11 w/ SHOOTING TIPS!
Hi-Key Instax Mini 9 Setting: What is it for?Read on as we explore theHi-Key Instax setting on the Instax Mini 9 (and Mini 8) cameras, and explain how best to use it for breathtaking Instax photos.
Why Is My Instax Mini 11 Not Working?Below are some reasons why your Instax Mini 11 may be malfunctioning. These are the most common reasons I’ve observed. 1) Battery issues 2) Won't take pictures.


Why does my Instax Mini 11 keep flashing and not taking pictures? ›

How can I fix this? If you are experiencing issues with your instax mini 11, 9 or 8 not turning on or the mode indicator lights keep flashing (mini 9 and 8 models only), please check you are using Alkaline batteries, if you're using non-alkaline batteries, this may be why you are experiencing some issues.

Why is my instax 11 flashing orange? ›

The orange lights flashing on the front of your mini 11 or mini 9 is your cameras way of telling you it is ready for a battery change! We recommend using alkaline batteries and changing them whilst your camera is in the on position.

Why is my instax flashing and not working? ›

FAQs. Try reinserting the batteries with the lens in the open position which should hopefully reset the issue. Failing this, the camera would require a repair. If the camera is still within the warranty period and you have retained the proof of purchase, this should be covered – subject to inspection.

Why is my camera blinking orange? ›

The orange boot light indicates the camera is waiting for connection from the computer. In most cases, the WiFi adapter or Firewall is on and preventing the camera from loading. See our blog post on this topic for the steps to follow when this happens.

Why is my camera flashing orange? ›

It means slow shutter speed, camera shake warning.

What does it mean when a Polaroid camera is blinking orange? ›

LED Blinking Orange: Battery Medium. There is enough charge for about 1 pack of film. The flash LED will blink orange while charging between shots, and will be solid orange when ready to shoot.

How do I know if my instax is broken? ›

You'll know it's a malfunction if all the lights on the lens adjustment dial continue to blink or if the red lamp by the viewfinder doesn't go off even after inserting brand new pair of AA batteries.


1. Fujifilm Instax Mini 11 - Frequently Asked Questions and Answers
2. FujiFilm Instax Mini 8 TroubleShoot (All lights blinking SOLVED |MINI 8 VS MINI 11 |ALICIABLIFESTYLE
(Alicia B Lifestyle)
3. Battery Swap: Instax mini 11
(Analogue Archive.)
4. BROKEN Instax Mini 11 STUCK FILM and How to FIX
5. how to use fuji instax mini 11 #quickguide #instax
(adam wolters)
6. Instax mini 9 flashing lights , help?
Top Articles
Latest Posts
Article information

Author: Allyn Kozey

Last Updated: 02/22/2023

Views: 5804

Rating: 4.2 / 5 (63 voted)

Reviews: 86% of readers found this page helpful

Author information

Name: Allyn Kozey

Birthday: 1993-12-21

Address: Suite 454 40343 Larson Union, Port Melia, TX 16164

Phone: +2456904400762

Job: Investor Administrator

Hobby: Sketching, Puzzles, Pet, Mountaineering, Skydiving, Dowsing, Sports

Introduction: My name is Allyn Kozey, I am a outstanding, colorful, adventurous, encouraging, zealous, tender, helpful person who loves writing and wants to share my knowledge and understanding with you.